Pololu Simple Motor Controller 18v7 (Fully Assembled)
34,53 € 21,96 €
-36%
Iva inclusa
POLOLU

Pololu Simple Motor Controller 18v7 (Fully Assembled)

POLOLU
Pololu Simple Motor Controller 18v7 (Fully Assembled)
Pololu Simple Motor Controller 18v7 (Fully Assembled)
COD: 304108
COD.MEPA: 304108CS

Descrizione

The Pololu Simple Motor Controller 18v7 makes basic control of brushed DC motors easy, with our free Simple Motor Control Center software enabling quick configuration over USB. The controller supports four interface modes: USB, TTL serial, analog voltage, and hobby radio control (RC). This version operates from 5.5 to 30 V and is efficient enough to deliver a continuous 7 A (>30 A peak) without a heat sink. It ships with the power capacitor and connectors installed as shown.

Dimensions
Size: 2.1" x 1.1" x 0.5"
Weight: 14 g
General specifications
Motor channels: 1
Control interface: USB; non-inverted TTL serial;
RC servo pulses; analog voltage1
Minimum operating voltage: 5.5 V
Maximum operating voltage: 30 V
Continuous output current per channel: 7 A2
Maximum PWM frequency: 21.77 kHz
Maximum logic voltage: 3.3 V3
Reverse voltage protection?: N
Partial kit?: N
Notes:

1 Autodetects baud rates between 1200 and 500,000 bps, or can be set to any fixed baud rate in this range.
2 Typical results at room temperature without a heat sink.
3 All digital inputs are 5V tolerant.
34,53 € 21,96 €
-36%

Iva inclusa
Disponibile
Il prodotto è disponibile presso il nostro magazzino Disponibile:
Il prodotto è disponibile presso il nostro magazzino

Descrizione

The Pololu Simple Motor Controller 18v7 makes basic control of brushed DC motors easy, with our free Simple Motor Control Center software enabling quick configuration over USB. The controller supports four interface modes: USB, TTL serial, analog voltage, and hobby radio control (RC). This version operates from 5.5 to 30 V and is efficient enough to deliver a continuous 7 A (>30 A peak) without a heat sink. It ships with the power capacitor and connectors installed as shown.

Dimensions
Size: 2.1" x 1.1" x 0.5"
Weight: 14 g
General specifications
Motor channels: 1
Control interface: USB; non-inverted TTL serial;
RC servo pulses; analog voltage1
Minimum operating voltage: 5.5 V
Maximum operating voltage: 30 V
Continuous output current per channel: 7 A2
Maximum PWM frequency: 21.77 kHz
Maximum logic voltage: 3.3 V3
Reverse voltage protection?: N
Partial kit?: N
Notes:

1 Autodetects baud rates between 1200 and 500,000 bps, or can be set to any fixed baud rate in this range.
2 Typical results at room temperature without a heat sink.
3 All digital inputs are 5V tolerant.

Recensioni

Hai comprato questo prodotto? Fai sapere agli altri cosa ne pensi.
Valuta