Addressable RGB 60-LED Strip, 5V, 1m (WS2812B)
32,45 € 17,08 €
-47%
Iva inclusa
POLOLU

Addressable RGB 60-LED Strip, 5V, 1m (WS2812B)

POLOLU
Addressable RGB 60-LED Strip, 5V, 1m (WS2812B)
Addressable RGB 60-LED Strip, 5V, 1m (WS2812B)
COD: 305325
COD.MEPA: 305325CS

Descrizione

These flexible RGB LED strips are an easy way to add complex lighting effects to a project.
Each LED has an integrated driver that allows you to control the color and brightness of each LED independently.
The combined LED/driver IC on these strips is the extremely compact WS2812B (essentially an improved WS2811 LED driver
integrated directly into a 5050 RGB LED), which enables higher LED densities. In the picture on the right, you can actually see the integrated driver and the bonding wires connecting it to the green, red, and blue LEDs, which are on at their dimmest setting.

Features and specifications:
-Individually addressable RGB LEDs (30, 60, or 144 LEDs per meter)
-24-bit color control (8-bit PWM per channel); 16.8 million colors per pixel
-One-wire digital control interface
-5 V operating voltage
-Each RGB LED draws approximately 50 mA at 5 V with red, green, and blue at full brightness
-12 mm width, 4.6 mm thickness
-Flexible, waterproof silicone rubber sheath (IP65 protection rating)
-Includes flexible silicone mounting brackets
-Black strip color
-Power/data connectors on both strip ends for easy chaining, and the input side includes an additional power and ground wire for alternate power connections
-Strips can be cut apart along the lines between each RGB LED segment to separate them into usable shorter sections
-Example code available for Arduino, AVR, and mbed
32,45 € 17,08 €
-47%

Iva inclusa
Disponibile
Il prodotto è disponibile presso il nostro magazzino Disponibile:
Il prodotto è disponibile presso il nostro magazzino

Descrizione

These flexible RGB LED strips are an easy way to add complex lighting effects to a project.
Each LED has an integrated driver that allows you to control the color and brightness of each LED independently.
The combined LED/driver IC on these strips is the extremely compact WS2812B (essentially an improved WS2811 LED driver
integrated directly into a 5050 RGB LED), which enables higher LED densities. In the picture on the right, you can actually see the integrated driver and the bonding wires connecting it to the green, red, and blue LEDs, which are on at their dimmest setting.

Features and specifications:
-Individually addressable RGB LEDs (30, 60, or 144 LEDs per meter)
-24-bit color control (8-bit PWM per channel); 16.8 million colors per pixel
-One-wire digital control interface
-5 V operating voltage
-Each RGB LED draws approximately 50 mA at 5 V with red, green, and blue at full brightness
-12 mm width, 4.6 mm thickness
-Flexible, waterproof silicone rubber sheath (IP65 protection rating)
-Includes flexible silicone mounting brackets
-Black strip color
-Power/data connectors on both strip ends for easy chaining, and the input side includes an additional power and ground wire for alternate power connections
-Strips can be cut apart along the lines between each RGB LED segment to separate them into usable shorter sections
-Example code available for Arduino, AVR, and mbed

Recensioni

Hai comprato questo prodotto? Fai sapere agli altri cosa ne pensi.
Valuta